<label id="cggoh"></label>

    <tr id="cggoh"></tr>
    歡迎您訪問鼎豪彈簧五金網站!

    鼎豪彈簧五金

    專業研究制造各類彈簧的專業工廠
    一站式彈簧制造解決方案
    當前位置:首頁>新聞資訊-技術與應用-造成彈簧墊圈開裂的因素
    分類導航
    聯系我們
    鼎豪彈簧五金 鼎豪彈簧五金

    聯系電話:13964843227

    咨詢電話:18706306739

    聯系地址:青島市即墨市,北安辦事處南600米路西

    造成彈簧墊圈開裂的因素
    文章來源:http://www.tlwpp.com/ 發布時間:2022-05-22 瀏覽次數:
    彈簧墊圈廣泛用于一般機械設備產品的受力和非受力結構中。它們的特點是成本低,安裝方便,適合頻繁裝拆。在螺紋領域,它們通常被稱為彈簧墊圈。有不銹鋼和碳鋼之分,碳鋼也有鐵。聽說很多人咨詢彈簧墊圈,都說之前做的彈簧墊圈有裂紋。我們分析了產生裂紋的主要原因如下:
    Spring washers are widely used in stressed and non stressed structures of general mechanical equipment products. They are characterized by low cost, convenient installation and suitable for frequent assembly and disassembly. In the field of threads, they are often referred to as spring washers. There are stainless steel and carbon steel, and carbon steel also has iron. I heard that many people consulted the spring washer and said that the spring washer made before had cracks. We analyzed the main causes of cracks as follows:
    1、原材料自身不好,例如品質不過關的合金鋼或是304等;
    1. The raw materials themselves are not good, such as alloy steel or 304 with poor quality;
    2、熱處理工藝強度過高,切削性能不太好,造成剛度不夠;
    2. The strength of heat treatment process is too high and the cutting performance is not very good, resulting in insufficient stiffness;
    3、電鍍工藝堿脆;
    3. Alkaline embrittlement of electroplating process;
    4、加工工藝不對;
    4. Incorrect processing technology;
    在機械結構設計、制做中避免螺帽(或地腳螺栓)全自動回松的方式有:
    The ways to avoid automatic loosening of nuts (or anchor bolts) in mechanical structure design and manufacturing are as follows:
    1、墊高彈簧墊圈;
    1. Raise the spring washer;
    2、用六角開槽螺母+銷釘;
    2. Use hexagon slotted nut + pin;
    3、墊高止動墊圈;
    3. Pad up the stop washer;
    4、六角螺栓的六角頭打孔插進鋼絲。
    4. The hexagon head of the hexagon bolt is perforated and inserted into the steel wire.、
    山東彈簧廠
    彈簧墊圈在擰緊的情況下裂開,有哪些處理的方法?實際上因為彈簧墊圈遭受了轉動地應力,這一地應力很有可能是在力矩時,墊圈和螺帽中間的磨擦而造成的,山東彈簧廠建議大家在在彈簧墊圈兩邊各加一個薄的金屬材料墊圈。
    The spring washer is cracked when it is tightened. What are the treatment methods? In fact, the spring washer suffers from rotational in-situ stress, which is likely to be caused by the friction between the washer and the nut during torque. Shandong Spring Factory suggests that you add a thin metal washer on both sides of the spring washer.
    假如兩邊都加了墊圈,那么彈簧墊圈還能具有緊固的功效嗎?實際上螺帽和彈墊中間不可以加平墊圈,不然起不上釋放壓力的實際效果;扭緊時裂開,表明你將彈簧墊圈弄反了,那樣不僅起不上緊固的功效并且還難以擰緊,你只需將彈簧墊圈反個方位裝上,便是彈簧墊圈的螺旋式方位和地腳螺栓的方位是反方向的,便會非常容易扭緊,而松動時卻很艱難。
    If washers are added on both sides, can spring washers still have the effect of fastening? In fact, a flat washer cannot be added between the nut and the spring washer, otherwise it will not have the actual effect of releasing pressure; Cracking when tightening indicates that you have reversed the spring washer, which not only can not tighten the effect, but also difficult to tighten. You only need to install the spring washer in the opposite direction, that is, the spiral orientation of the spring washer and the orientation of the anchor bolt are in the opposite direction, so it will be very easy to tighten, but it is very difficult to loosen.
    用戶應根據自己的使用特點,使用不同的材料和后處理程序。對此,您可以咨詢彈簧的生產廠家,比如說關注我們的網站www.tlwpp.com,咨詢關于彈簧的更多事項!
    Users should use different materials and post-processing procedures according to their own use characteristics. For this, you can consult the spring manufacturer, for example, pay attention to our website www.tlwpp.com COM, consult more about spring!